2013年3月10日日曜日

KitMill BT100 導入

久しぶりの更新になります.というより今年初めての投稿ですか.

今週末は少し時間がとれたので,とりあえずマウス作るには道具が必要だろうということで,オリジナルマインドのKitMill BT100を購入して組み立てました.何か加工するのが楽しみというより組み立てることそのものが楽しかったですね.

作ったはいいけど,切りくずの問題があるのでケースに入れてから使いたい.でも作るの面倒.そして,BT100のパーツが入っていた段ボールがじゃま.この段ボールかなり頑丈なんですよね.これをケースにすると一石二鳥か.

しかも,同じ箱が2個あるわけで,密閉して騒音低減.騒音カット効果はそれほど大きいわけではありませんが,もともと音は小さいので大丈夫でしょう.それより中が見えないのはあまりよくない.

で,動作テスト.当たり前なんでしょうが,手順通りに作れば何らトラブルなく動作しますね.testプログラムで2mmのエンドミルを使ってPOMに "TEST" の文字を切削.

さて,これでマウスのパーツを作れるのはいつになるでしょうかねえ.

8 件のコメント:

Green さんのコメント...

That looks awesome, how much did you spend on this mill machine? Anything you are planning to do related to build micromouse parts? Sorry I can't 100% understand what you were saying in the article with the help of google translate :)

kojima さんのコメント...

It cost approximately 130,000 JPY. Some micromouse parts? I have no plan. First I want to examine what kind of parts I can make with this machine. Then, I will plan a next new mouse.

(I also tried to read google-translated version of this page, but I couldn't understand those sentences...)

Green さんのコメント...

I've heard people in Taiwan use it to mill acrylic full size mouse motor mount, it might work on half size as well.

Green Ye さんのコメント...

Hi Mr Kojima
I just have a question recently. Since the CNC you have doesn't have any feature to help secure the object material on the milling platform easily, how did you do it? So far I only saw people use hot glue to glue the material on the side. Do you have any better idea?

Kojima さんのコメント...

I fix an object material on the milling platform with double-side tape. The manufacturer of the CNC explains the method in its webpage. When the object is POM, double-side tape is very useful and enough.

Green Ye さんのコメント...

Double sided tape! That's interesting! Isn't the tap strong enough? Have you ever tried use hot glue to seal the side instead? How did you deal aluminum? Is this kinda of mini mill has a spindle strong enough to mill aluminum with sufficient accuracy?

Kojima さんのコメント...

I haven't tried hot glue. I have little experience with aluminum, but double sided tape is enough strong if the surface (the contact area between aluminum and milling platform) is large.

There are many kind of aluminum, A5052, A2017, etc. I think that widely used aluminum such as A5052 can be milled by mini mill, but that it is difficult to mill high-strength aluminum.

Green Ye さんのコメント...

I think 6065 Aluminum is the easiest I can get at United States. It looks harder than 5052. Hope it works. Thanks for your help.

コメントを投稿